Description
Ardex – DPM 1C One Coat Surface Damp Proof Membrane
ARDEX DPM 1C is a one-coat solvent-free, low-viscosity, two-component epoxy resin. After hardening, ARDEX DPM 1C produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength. ARDEX DPM 1C has excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids.
ARDEX DPM 1C has been specifically developed to provide either a damp-proof membrane or to suppress residual moisture in concrete slabs and cement/sand screeds which are well compacted and sound, where readings of up to 98% RH are measured.
ARDEX DPM 1C can be used as a damp-proof membrane that deals with damp concrete where a structural damp-proof membrane is not present or is ineffective, with the risk of ground-bearing moisture. A thinner application may be used to suppress residual moisture in concrete slabs and cement/sand screeds which are well compacted and sound, where readings of up to 92% RH are measured.
Product Specifications & Key Features:
- Available in 6kg, 10kg and 25kg capacity
- Density at 20°C: 1.54
- Working Time: 20 minutes at 20°C
- Over-coating if required: 6-8 hours at 20°C
- Walkability at 20°C: After 6 hours
- Colour: Black
Packaging and Storage:
6kg, 10kg and 25kg units of ARDEX DPM 1C are supplied in pre-gauged metal duo containers. The hardener (Component B) is in the small container and the resin (Component A) is in the large container with room to mix in the hardener (Component B).
Store in dry conditions. ARDEX DPM 1C has a storage life of not less than 12 months in the original unopened containers.