F Ball – F47 (15ltr) Pressure Sensitive Isolator Adhesive

£131.76 /item (incl. VAT)

Out of stock

  • Available for Next Day & Saturday Delivery
  • No Minimum Order
  • Order yours before 1pm for same-day dispatch

Description

F Ball – F47 Pressure Sensitive Isolator Adhesive – 15ltr

STYCCOBOND F47 is a solvent-free acrylic polymer emulsion adhesive for securing sheet vinyl floorcoverings onto STOPGAP ISOLATOR MEMBRANE where the Relative Humidity of the subfloor does not exceed 92%. 

The adhesive dries to a permanently tacky film, has excellent plasticiser resistance and is suitable for use over normal underfloor heating installations. 

Where the Relative Humidity of the subfloor exceeds 92% or if mechanical fixings are to penetrate the adhesive film and membrane STYCCOBOND F84 should be used.

Product Specifications & Key Features:

  • Appearance: Viscous Liquid
  • Colour: Pale Blue
  • Available in 15ltr capacity
  • Drying Time (approx.): From 60 minutes depending on temperature and humidity
  • Coverage (approx.): 5m² per litre with 1.5mm x 5mm trowel or 3m² per litre with either a STYCCOBOND FINE NOTCH trowel:
    • 15 litres Tub = 75m² with 1.5mm x 5mm trowel
    • 15 litres Tub = 45m² with a STYCCOBOND FINE NOTCH trowel
  • Note: Coverage rates will depend on the condition and absorbency of the subfloor

Application:

Using a 1.5mm x 5mm “V” notched trowel, hold the trowel at an angle of 60° and apply the adhesive to the STOPGAP ISOLATOR MEMBRANE then immediately roll with a paint roller, which has been pre-wetted with adhesive. The use of the roller will help to reduce drying time and help to obtain a smooth, uniform appearance and minimise adhesive grin throughout. 

Alternatively, using a STYCCOBOND Fine notch trowel, hold the trowel at an angle of 60° and apply the adhesive to the STOPGAP ISOLATOR MEMBRANE. The use of a STYCCOBOND Fine notch “V” notched trowel will extend the drying time of the adhesive. 

When the adhesive has dried to a clear film, follow the floorcovering manufacturer’s laying instructions and use the guidelines given below. 

Place the floorcovering into the adhesive and press from the centre outwards to exclude any air; then roll from end to end and side to side using a 68kg flooring roller. 1 to 4 hours later roll again in two directions.

Note: Drying time of the adhesive will be extended at lower temperatures. The use of forced warm air dryers will help to reduce drying times. Care should be taken not to contaminate the drying adhesive film with building dust or debris as this can mirror through the finished floorcovering.

For any areas under question please consult the F Ball Technical team.

Precautions:

Do not use the paint roller to extend the area covered by the adhesive, as this will reduce adhesion.
Where the Relative Humidity of the subfloor exceeds 92% or where fittings are to penetrate the surface of the floorcovering and STOPGAP ISOLATOR i.e. drill fixings, STYCCOBOND F84 should be used.

Tools:

STYCCOBOND Fine Notch (A1) or 1.5mm x 5mm “V” notched trowel, F. Ball 68kg flooring roller, Trimming knife, STYCCOBOND paint roller. Tools should be cleaned with warm soapy water while the adhesive is still wet.

Storage:

Store between 5°C and 30°C. Protect from frost.

Shelf Life:

12 months in unopened containers stored under good conditions.

Additional information

Weight 16.9 kg
Size

15 ltr

Appearance

Tub

Brand

F-Ball

Delivery Information

We aim to dispatch all orders within 1 working day of receipt. Occasionally public holidays, weekends, weather events, or extremely busy periods may result in extended delivery times. In these circumstances, we will endeavour to communicate with you about the delay and resolve and resulting issues.

Please note that we do not make delivery date promises, however:

  • Orders placed before 1 pm on a weekday will be processed the same day.
  • Orders placed after 1 pm on a weekday will be processed the following morning.
  • Orders placed after 1 pm on Thursday will be processed and dispatched the following day and out for delivery the following Monday (if Next Day Delivery is selected).
  • Orders placed after 1 pm on Fridays will be processed and dispatched on the following Monday.
  • Saturday Delivery – the cut-off day to receive an order on a Saturday of the same week is Thursday.

For more information about our Shipping, Delivery & Returns services click HERE


UK Mainland Delivery Options:

Free Collection from our London Store (See on the Map)
(Monday – Thursday: 9 am–5 pm; Friday: 9 am-1 pm excluding public holidays)
Location: 41 Markfield Road, London N15 4QA
£9.50 Standard Delivery: 3-5 Working Days
Applicable for all orders (apart from Pipe Covers & Samples)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£18.00 Express Delivery: Next Working Day
For orders placed before 1 pm on a weekday
(Monday – Friday, 9 am–5 pm excluding public holidays)
£12.50 Bulky Item Surcharge Fee
For orders containing heavy & bulky items (Selected Underlays & Selected 2-metre width Coir Matting only)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£20.00 Long Item Surcharge Fee
For orders of long-length items (2700mm Metal Door Bars & Laminate Scotia Beadings)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£65.00 Saturday Delivery
(Saturday only, 8 am-1 pm excluding public holidays)

Out-Of-Zone Locations

Unfortunately, due to courier restrictions, we do not deliver to the locations listed below:
– Isle of Wight, Isles of Scilly, Western Isles, Shetland Isles, Orkney, Isle Of Man, Channel Islands, Northern Ireland, Republic of Ireland

In addition, we do not deliver to any locations with the postcodes listed below:
– IV27, IV40 -> IV49, IV51 -> IV56
– KA27, KA28
– PA28, PA29, PA40 -> PA49, PA60 -> PA80
– PH39 -> PH44

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)