Description
F Ball Stopgap Seal (5ltr) for use with Stopgap 800 Wearcoat
STOPGAP SEAL is a clear, water-dispersed modified polyurethane sealer designed to be applied to STOPGAP 800 WEARCOAT to provide a hygienic and protective surface. The application of STOPGAP SEAL helps to protect the floor surface and ease maintenance by reducing the adhesion of dirt and other debris. STOPGAP SEAL is also resistant to many of the chemicals commonly found in commercial applications.
Product Specifications & Key Features:
- Appearance: 5 litre bottle
- Colour: Clear
Coverage:
STOPGAP SEAL should be applied neat and will cover approximately 10m² per litre per coat. Coverage rates are approximate and will vary according to the amount of overcoating during application. A second coat will generally require less material.
- 5ltr = approximately 50m²
For any areas under question please consult the F Ball Technical team.
Application:
SHAKE WELL BEFORE USE. Pour STOPGAP SEAL into a roller tray and, using a roller, apply it evenly over the surface at a rate of approximately 10m² per litre. When applying a second coat of STOPGAP SEAL, we would recommend that this be applied at an angle of 90 degrees to the first coat to ensure complete coverage. Under typical conditions, a second coat can be applied approximately 1 hour after the first.
Note: DO NOT POUR STOPGAP SEAL DIRECTLY ONTO THE SURFACE OF STOPGAP 800
Drying Time:
STOPGAP SEAL should be tack-free in approximately 1 hour at 20ºC and ready to accept light foot traffic after 6 hours. Wheeled traffic can be accepted after 24 hours, but in heavy-duty applications, the floor should not be used for 3 days to allow full drying and curing of the seal.
Tools:
STYCCOBOND paint roller and paint tray. Wash tools with warm soapy water immediately after use
Storage:
Store between 5ºC and 30ºC. Protect from frost.
Shelf Life:
12 months in unopened containers stored under good conditions.