F Ball - Stopgap 460 Exterior (10kg) Rapid Repair Compound for Floors

each
Bulk Buy Discount
£25.07
In stock
SKU
F Ball - Stopgap 460 (10kg)
  • 2 items +    £23.87
  • 5 items +    £23.27
 
  • Available for Next Day Delivery
  • FREE Delivery when you spend over £100

F Ball - Stopgap 460 Exterior (10kg) Rapid Repair Compound for Floors

STOPGAP 460 is a polymer modified, fast setting mortar for repairing external floors prior to the application of STOPGAP 850 or for use in internal applications under STOPGAP waterproof surface membranes. It has been specifically designed for use in damp conditions and has excellent freeze / thaw resistance when used in external environments. 

STOPGAP 460 can be used for the non-structural repair of lower strength concrete elements such as floor screeds, concrete paving slabs, balcony edges, stair treads and risers and is also suitable for producing gradients for ramps. 

STOPGAP 460 is dimensionally stable and is supplied as a pre-blended dry powder designed for applications between 3-50mm. It is protein-free which allows it to be used in biologically sensitive areas. STOPGAP 460 is suitable for use with sand/cement screeds and concrete and under STOPGAP waterproof surface membranes.

Technical Information:

  • Appearance: 10kg plastic bucket
  • Consumption per mm thickness:1.43 kg/m²
  • Working Time @ 20°C: 10 – 15 minutes
  • Walk on hardness time @ 20°C: 60 minutes
  • Application thickness: from 2 - 50mm
  • Ready for covering: 24 hours

 

Coverage:

A 10kg bucket of STOPGAP 460 mixed with 2.6 litres of clean water will cover approximately 0.7m2 at a thickness of 10mm. Note: Coverage rates will depend on the condition and absorbency of the subfloor

Application:

Trowel the mix onto the subfloor and spread to the required thickness ensuring good compaction to the existing profile at time of placing. For increased economy, with applications of more than 10mm, the filled mix can be used. If required the finish of the mortar can be improved by the use of a wet smoothing trowel or damp sponge before the mortar has fully set, typically 15 to 20 minutes at 20ºC. When being applied in external applications, protect the repair area from rain, wind and direct sunshine whilst curing.

For any areas under question please consult the F Ball Technical team.

Setting:

The initial set time of the repair compound is approximately 60 minutes at 20ºC and can accept light foot traffic after this time. Lower temperatures will extend this time i.e. at 10ºC set time will be approximately 2 hours. When STOPGAP 460 is applied beneath STOPGAP 850 Exterior or a STOPGAP waterproof surface membrane the mortar should be left for 24 hours before overcoating.

Tools:

Suitable steel smoothing trowel, spiked roller, mixing bucket, electric drill and power whisk. Wash tools with water immediately after use.

Storage:

This product must be stored under cover, in unopened bags clear of the ground in cool dry conditions, protected from frost and excessive draught.

Shelf Life:

9 months in unopened buckets and stored under good conditions.

Delivery Information

We aim to dispatch all orders within 2 working day of receipt. Occasionally public holidays, weekends, weather events, or extremely busy periods may result in extended delivery times. In these circumstances, we will endeavour to communicate with you about the delay and resolve and resulting issues.

Please note that we do not make delivery date promises, however:

- Orders placed before 1pm on a weekday will be processed the same day.

- Orders placed after 1pm on a weekday will be processed the following morning. 

- Orders placed after 1pm on Thursday will be processed and dispatched the following day and out for delivery the following Monday (if Next Day Delivery is selected).

- Orders placed after 1pm on Fridays will be processed and dispatched on the following Monday.

For more information about our Shipping & Delivery services click HERE

UK Mainland Delivery Options:

£0.00

Free Delivery: Applicable for orders of £100 excl. VAT and above
(Monday – Friday, excluding public holidays)

£0.00

Collect From Store: 41 Markfield Road, London N15 4QA
(Monday – Friday, 9am–5pm excluding public holidays)

£7.50

Standard Delivery: 3-5 Working Days
(Monday – Friday, excluding public holidays)

£12.50

Express Delivery: Next Working Day
(Monday – Friday, excluding public holidays)

Out Of Zone Delivery Surcharges:

Isle of Wight

£12.50 per item (3-5 Working Days)

Isles of Scilly

£12.50 per item (3-5 Working Days)

Northern Ireland

£25.00 per item (3-5 Working Days)

Western Isles

£25.00 per item (3-5 Working Days)

Shetland Isles

£30.00 per item (3-5 Working Days)

Orkney

£30.00 per item (3-5 Working Days)

Isle Of Man

£30.00 per item (3-5 Working Days)

Channel Islands

£30.00 per item

Republic of Ireland

Not Available

 

paypalconfidence