F Ball – F41 Styccobond Carpet Tile Tackifier

£47.32 /item (incl. VAT)

Total:
  • Available for Next Day & Saturday Delivery
  • No Minimum Order
  • Order yours before 1pm for same-day dispatch

Description

F Ball F41 Styccobond Carpet Tile Tackifier

STYCCOBOND F41 is a solvent-free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents ‘loose lay’ carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques.

STYCCOBOND F41 can be used for securing a wide range of carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings.

STYCCOBOND F41 can also be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP Waterproof Surface Membranes, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, Linoleum and Vinyl Floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

Product Specifications & Key Features:

  • Appearance: Viscous Liquid
  • Colour: White
  • Available in 20ltr, 15ltr and 5ltr capacity
  • Drying Time (approx.): 30 minutes depending on temperature, humidity and absorbency of the subfloor
  • Coverage (approx.): 7m2 per litre with a roller:
    • 20 litres Tub = 160 – 440
    • 15 litres Tub = 120 – 330
    • 5 litres Tub = 40 – 110
  • Note: Coverage rates will depend on the condition and absorbency of the subfloor

Application:

Using the brush or roller, apply the adhesive evenly to the subfloor, over the whole area to be covered. Allow drying to a clear, tacky film before placing the carpet tiles in position, pressing firmly from the centre outwards and paying particular attention to the edges. When used over a raised access panel system, the tackifier should be poured into a tray and applied carefully using a roller to avoid excess adhesive seeping between individual panels and achieve the recommended coverage figure.

Installation of PVC-backed carpet tiles over vinyl floorcoverings – Apply STYCCOBOND F41 by brush or roller in bands to the back of the tile, avoiding the edges. Allow to dry before placing the tile in position.

For any areas under question please consult the F Ball Technical team.

Precautions:

Do not place the tiles before the adhesive has dried to a clear film. This can result in a permanent bond being formed. In heavy traffic areas e.g. where concentrated stiletto heel or heavy wheeled traffic is anticipated, permanently bonding tiles have been found to help extend their life. Consult the tile manufacturer for advice in these situations.

Tools:

STYCCOBOND Paint Roller or medium stiff broom. Tools should be cleaned with warm soapy water while the adhesive is still wet.

Storage:

Store between 5ºC and 30°C. Protect from frost.

Shelf Life:

12 months in unopened containers stored under good conditions.

Additional information

Weight N/A
Size: No selection

20 ltr, 5 ltr

Appearance: No selection

Tub

Brand: No selection

F-Ball

Delivery Information

We aim to dispatch all orders within 1 working day of receipt. Occasionally public holidays, weekends, weather events, or extremely busy periods may result in extended delivery times. In these circumstances, we will endeavour to communicate with you about the delay and resolve and resulting issues.

Please note that we do not make delivery date promises, however:

  • Orders placed before 1 pm on a weekday will be processed the same day.
  • Orders placed after 1 pm on a weekday will be processed the following morning.
  • Orders placed after 1 pm on Thursday will be processed and dispatched the following day and out for delivery the following Monday (if Next Day Delivery is selected).
  • Orders placed after 1 pm on Fridays will be processed and dispatched on the following Monday.
  • Saturday Delivery – the cut-off day to receive an order on a Saturday of the same week is Thursday.

For more information about our Shipping, Delivery & Returns services click HERE


UK Mainland Delivery Options:

Free Collection from our London Store (See on the Map)
(Monday – Thursday: 9 am–5 pm; Friday: 9 am-1 pm excluding public holidays)
Location: 41 Markfield Road, London N15 4QA
£9.50 Standard Delivery: 3-5 Working Days
Applicable for all orders (apart from Pipe Covers & Samples)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£18.00 Express Delivery: Next Working Day
For orders placed before 1 pm on a weekday
(Monday – Friday, 9 am–5 pm excluding public holidays)
£12.50 Bulky Item Surcharge Fee
For orders containing heavy & bulky items (Selected Underlays & Selected 2-metre width Coir Matting only)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£20.00 Long Item Surcharge Fee
For orders of long-length items (2700mm Metal Door Bars & Laminate Scotia Beadings)
(Monday – Friday, 9 am–5 pm excluding public holidays)
£65.00 Saturday Delivery
(Saturday only, 8 am-1 pm excluding public holidays)

Out-Of-Zone Locations

Unfortunately, due to courier restrictions, we do not deliver to the locations listed below:
– Isle of Wight, Isles of Scilly, Western Isles, Shetland Isles, Orkney, Isle Of Man, Channel Islands, Northern Ireland, Republic of Ireland

In addition, we do not deliver to any locations with the postcodes listed below:
– IV27, IV40 -> IV49, IV51 -> IV56
– KA27, KA28
– PA28, PA29, PA40 -> PA49, PA60 -> PA80
– PH39 -> PH44

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
I
Ian R.
Best adhesive for carpet tiles, easy to apply

Best adhesive for carpet tiles, easy to apply