F Ball - F74 (7kg) Styccobond Polyurethane Flooring Adhesive

Bulk Buy Discount
In stock
F Ball - F74 (7kg)
  • 2 items +    £56.94
  • 3 items +    £53.95
  • Available for Next Day Delivery
  • FREE Delivery when you spend over £100

F Ball - F74 (7kg) Styccobond Polyurethane Flooring Adhesive

STYCCOBOND F74 is a single pack, moisture curing polyurethane adhesive suitable for fixing floorcoverings and for seaming synthetic grass carpets. It is water resistant and although it is suitable for outdoor use, it is not intended to be used as, or a substitute for a surface damp proof membrane. It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.

STYCCOBOND F74 can be used for securing needlepunched / fibre bonded carpets, synthetic grass carpets, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings.

STYCCOBOND F74 can be applied to STOPGAP smoothing underlayments, sound, smooth subfloors of concrete, granolithic, sand/cement screeds and plywood. When laying impervious floorcoverings onto non-absorbent subfloors e.g. vinyl flooring onto terrazzo, the subfloor must be prepared and skimmed with a minimum 3mm of the appropriate STOPGAP smoothing underlayment to assist curing.

Technical Information:

  • Appearance: Thick Paste
  • Colour: Beige
  • Open Time: 20 - 25 minutes depending on temperature, humidity and absorbency of the subfloor
  • Cure Time: Initial set 2 - 6 hours; Full cure 48 - 72 hours
  • Coverage Rates (approx.): 2.35m2 per kg with 1.5mm x 5mm trowel or 1.4m2 per kg with a 2mm x 6mm trowel or 1.2m2 per kg with 3mm x 6mm trowel.

    7kg tin = 16.5m2 with 1.5mm x 5mm trowel

    7kg tin = 10m2 with a 2mm x 6mm trowel
    7kg tin = 8.5m2 with 3mm x 6mm trowel

    Coverage rates will depend on the condition and absorbency of the subfloor.


Store the adhesive in warm conditions before use to assist spreading.

Fixing floorcoverings - floorcoverings must be laid and allowed to flatten for 24 hours before securing and should be cut to fit before spreading the adhesive. Holding the trowel at an angle of 60°, spread the adhesive evenly over an area of subfloor that can be covered within the open time of the adhesive. Lay the floorcovering immediately and roll to ensure overall adhesion.

Apply weights as necessary to ensure contact between flooring and substrate until the adhesive has set.

With deeply profiled or rough backed floorings, it may be necessary to apply extra adhesive to ensure good contact. In such cases use a STYCCOBOND 3mm x 6mm ‘V’ notched trowel. This will reduce the coverage rates quoted. 

Seaming synthetic grass carpets - Holding the trowel at an angle of 60°, apply the adhesive to the seam backing material and immediately place the carpet in position. Press firmly into place and apply weights to ensure contact until the adhesive has set. 

The open time of the adhesive is dependent on temperature, humidity and absorbency of the subfloor.

For any areas under question please consult the F Ball Technical team.


Do not weld vinyl floorcoverings until the adhesive has fully cured. Do not apply loads or move furniture on the floorcovering until the adhesive has fully cured. External installations must be protected from rain until the adhesive has cured.


STYCCOBOND 2mm x 6mm ‘V’ notched trowel or a STYCCOBOND 1.5mm x 5mm ‘V’ notched trowel for smooth backed resilient floorcoverings. Deeply profiled or rough backed floorings use a STYCCOBOND 3mm x 6mm ‘V’ notched trowel. F. Ball 68kg flooring roller.

STYCCOBOND Safety Spreader or flat brush. Clean tools with STYCCOCLEAN C141 before the adhesive has cured.


Store between 5°C and 30°C. Protect from frost.

Shelf Life:

9 months in unopened containers stored under good conditions.

Delivery Information

We aim to dispatch all orders within 2 working day of receipt. Occasionally public holidays, weekends, weather events, or extremely busy periods may result in extended delivery times. In these circumstances, we will endeavour to communicate with you about the delay and resolve and resulting issues.

Please note that we do not make delivery date promises, however:

- Orders placed before 1pm on a weekday will be processed the same day.

- Orders placed after 1pm on a weekday will be processed the following morning. 

- Orders placed after 1pm on Thursday will be processed and dispatched the following day and out for delivery the following Monday (if Next Day Delivery is selected).

- Orders placed after 1pm on Fridays will be processed and dispatched on the following Monday.

For more information about our Shipping & Delivery services click HERE

UK Mainland Delivery Options:


Free Delivery: Applicable for orders of £100 excl. VAT and above
(Monday – Friday, excluding public holidays)


Collect From Store: 41 Markfield Road, London N15 4QA
(Monday – Friday, 9am–5pm excluding public holidays)


Standard Delivery: 3-5 Working Days
(Monday – Friday, excluding public holidays)


Express Delivery: Next Working Day
(Monday – Friday, excluding public holidays)

Out Of Zone Delivery Surcharges:

Isle of Wight

£12.50 per item (3-5 Working Days)

Isles of Scilly

£12.50 per item (3-5 Working Days)

Northern Ireland

£25.00 per item (3-5 Working Days)

Western Isles

£25.00 per item (3-5 Working Days)

Shetland Isles

£30.00 per item (3-5 Working Days)


£30.00 per item (3-5 Working Days)

Isle Of Man

£30.00 per item (3-5 Working Days)

Channel Islands

£30.00 per item

Republic of Ireland

Not Available